Меню

Настройка android sdk для unity



Android SDK Setup

Whether you’re building an Android application in Unity or programming it from scratch, you need to set up the Android SDK (software development kit) before you can build and run any code on your Android device.

1. Download the Android SDK

On your PC, go to the Android Developer SDK website. Download and unpack the latest Android SDK.

2. Install the Android SDK

Follow the instructions in Installing the SDK. You can skip the optional sections relating to Eclipse. In step 4 of Installing the SDK, be sure to add at least one Android platform with API level equal to or higher than 9 (Platform 2.3 or greater), the Platform Tools, and the USB drivers if you’re using Windows.

3. Enable USB debugging on your device

USB debugging is a useful way to debug while connecting your Android device to the SDK, so get this set up before moving on to the next step.

To enable USB debugging, you first need to enable Developer options. To do this, navigate your phone to the “Build number” portion in your device’s Settings. Finding it can be different depending on the device:

  • Stock Android: Settings >About phone >Build number
  • Samsung Galaxy S5: Settings >About device >Build number
  • LG G3: Settings >About phone >Software information >Build number
  • HTC One (M8): Settings >About >Software information >More >Build number

Note: On operating systems older than version 4.2 (Jelly Bean), the Developer options aren’t hidden. Go to Settings > Developer options, then enable USB debugging.

Navigate to Build number using the instructions above. Tap on the build number 7 times. A small pop-up notification appears saying “you are now X steps away from being a developer” with a number that counts down with every additional tap. On the 7th tap, Developer options are unlocked. Go to Settings > Developer options, and check the USB debugging checkbox to enable debug mode when the device is connected to a computer via USB.

4. Connect your Android device to the SDK

This can be tricky, especially under Windows-based systems where drivers tend to be a problem. Your device may come with additional information or specific drivers from the manufacturer.

  • Windows: If the Android device is automatically recognized by the system you still might need to update the drivers with the ones that came with the Android SDK. You can do this through the Windows Device Manager. If the device is not recognized automatically, use the drivers from the Android SDK, or any specific drivers provided by the manufacturer. Find further information regarding USB Drivers for Windows on the Android Developer page.
  • Mac: If you’re developing on macOS, you usually don’t need any additional drivers.

If you are unsure whether your device is properly installed on your system, please read the Android development troubleshooting page for details.

5. Add the Android SDK path to Unity

The first time you build a project for Android (or if Unity later fails to locate the SDK), you will be asked to locate the folder where you installed the Android SDK. Select the root folder of the SDK installation. If you wish to change the location of the Android SDK, in the menu bar go to Unity > Preferences, then click External Tools.

Источник

Android environment setup

To build and run for Android, you must install the Unity Android Build Support platform module. You also need to install the Android Software Development Kit (SDK) and the Native Development Kit (NDK) to build and run any code on your Android device. By default, Unity installs a Java Development Kit based on OpenJDK.

Note: Unity supports Android 4.4 “KitKat” and above. See AndroidSdkVersions for details.

1. Install Android Build Support and the Android SDK & NDK tools

Use the Unity Hub to install Android Build Support and the required dependencies
See in Glossary : Android SDK & NDK tools, and OpenJDK.

Add Android modules

You can install Android Build Support, the Android SDK & NDK tools and OpenJDK when you install the Unity Editor, or add them at a later time.

For information on adding the Android modules:

Note: If you’re using Unity on macOS 10.15 (Catalina) and you don’t install Android tools through the Unity Hub, your operating system’s default security settings will prevent the Android NDK binaries being executed. You must either change these security settings, or download a signed Android NDK (r16b) from the Android developer website.

Читайте также:  Как сбросить настройки андроид не включая его

If you are using a 2018 version of Unity, see the Unity 2018.4 documentation for information on manually installing these dependencies.

2. Enable USB debugging on your device

To enable USB debugging, you must enable Developer options on your device. To do this, find the build number in your device’s Settings menu. The location of the build number varies between devices; for stock Android, it’s usually Settings > About phone > Build number. For specific information on your device and Android version, refer to your hardware manufacturer.

After you navigate to the build number using the instructions above, tap on the build number seven times. A pop-up notification saying “You are now X steps away from being a developer” appears, with “X” being a number that counts down with every additional tap. On the seventh tap, Developer options are unlocked.

Note: On Android versions prior to 4.2 (Jelly Bean), the Developer options are enabled by default.

Go to Settings > Developer options (or, if this does not work, on some devices the path is Settings > System > Developer options), and check the USB debugging checkbox. Android now enters debug mode when it is connected to a computer via USB.

Connect your device to your computer using a USB cable. If you are developing on a Windows computer, you might need to install a device-specific USB driver. See the manufacturer website for your device for additional information.

The setup process differs for Windows and macOS and is explained in detail on the Android developer website. For more information on connecting your Android device to the SDK, refer to the Run Your App section of the Android Developer documentation.

Customizing the Android SDK & NDK Tools and OpenJDK installation

Unity recommends that you use the Unity Hub to install Android SDK & NDK tools, to ensure that you receive the correct versions and configuration. Unity installs Android SDK & NDK Tools and OpenJDK respectively in the SDK, NDK and OpenJDK folders under /Unity/Hub/Editor/[EditorVersion]/Editor/Data/PlaybackEngines/AndroidPlayer/.

If you have multiple versions of Unity with the same required dependencies (be sure to check System requirements for the latest) and you want to avoid duplicating the installation of Android SDK & NDK Tools and OpenJDK, you can specify a shared location in the Unity Preferences window. To do this, go to Preferences > External tools and enter the directory paths in the SDK and NDK fields:

Preferences window showing external tools settings for Android

Warning: Unity does not officially support versions of the OpenJDK, SDK, or NDK other than the ones it supplies.

To change the OpenJDK, SDK Tools, or NDK that Unity uses to build Android apps:

  1. Open the Project.
  2. Open the Preferences window (Windows and Linux: Edit >Preferences; macOS: Unity >Preferences).
  3. In the left navigation column, select External Tools.

Change the OpenJDK path

  1. Uncheck JDK Installed with Unity (recommended).
  2. In the JDK field, enter the path to the JDK installation folder, or use the Browse button to locate it.

Change the Android SDK Tools path

  1. Uncheck Android SDK Tools Installed with Unity (recommended).
  2. In the SDK field, enter the path to the SDK installation folder, or use the Browse button to locate it.

Unity works with the most recent version of the Android SDK available at the time of the Unity version release.

Change the Android NDK path

  1. Uncheck Android NDK Installed with Unity (recommended).
  2. In the NDK field, enter the path to the NDK installation folder, or use the Browse button to locate it.

Each version of Unity requires a specific version of the Android NDK to be installed:

Unity version NDK version
2017.4 LTS r13d
2018.4 LTS r16b
2019.1 r16b
2019.2 r16b
2019.3 r19

See the System requirements page for a complete list of requirements.

Источник

Android environment setup

To build and run for Android, you must install the Unity Android Build Support platform module. You also need to install the Android Software Development Kit (SDK) and the Native Development Kit (NDK) to build and run any code on your Android device. By default, Unity installs a Java Development Kit based on OpenJDK.

Note: Unity supports Android 4.4 “KitKat” and above. See AndroidSdkVersions for details.

1. Install Android Build Support and the Android SDK & NDK tools

Use the Unity Hub to install Android Build Support and the required dependencies: Android SDK & NDK tools, and OpenJDK.

Add Android modules

You can install Android Build Support, the Android SDK & NDK tools and OpenJDK when you install the Unity Editor, or add them at a later time.

For information on adding the Android modules:

Note: If you’re using Unity on macOS 10.15 (Catalina) and you don’t install Android tools through the Unity Hub, your operating system’s default security settings will prevent the Android NDK binaries being executed. You must either change these security settings, or download a signed Android NDK (r16b) from the Android developer website.

If you are using a 2018 version of Unity, see the Unity 2018.4 documentation for information on manually installing these dependencies.

2. Enable USB debugging on your device

To enable USB debugging, you must enable Developer options on your device. To do this, find the build number in your device’s Settings menu. The location of the build number varies between devices; for stock Android, it’s usually Settings > About phone > Build number. For specific information on your device and Android version, refer to your hardware manufacturer.

After you navigate to the build number using the instructions above, tap on the build number seven times. A pop-up notification saying “You are now X steps away from being a developer” appears, with “X” being a number that counts down with every additional tap. On the seventh tap, Developer options are unlocked.

Note: On Android versions prior to 4.2 (Jelly Bean), the Developer options are enabled by default.

Go to Settings > Developer options (or, if this does not work, on some devices the path is Settings > System > Developer options), and check the USB debugging checkbox. Android now enters debug mode when it is connected to a computer via USB.

Connect your device to your computer using a USB cable. If you are developing on a Windows computer, you might need to install a device-specific USB driver. See the manufacturer website for your device for additional information.

The setup process differs for Windows and macOS and is explained in detail on the Android developer website. For more information on connecting your Android device to the SDK, refer to the Run Your App section of the Android Developer documentation.

Customizing the Android SDK & NDK Tools and OpenJDK installation

Unity recommends that you use the Unity Hub to install Android SDK & NDK tools, to ensure that you receive the correct versions and configuration. Unity installs Android SDK & NDK Tools and OpenJDK respectively in the SDK, NDK and OpenJDK folders under /Unity/Hub/Editor/[EditorVersion]/Editor/Data/PlaybackEngines/AndroidPlayer/.

If you have multiple versions of Unity with the same required dependencies (be sure to check System requirements for the latest) and you want to avoid duplicating the installation of Android SDK & NDK Tools and OpenJDK, you can specify a shared location in the Unity Preferences window. To do this, go to Preferences > External tools and enter the directory paths in the SDK and NDK fields:

Preferences window showing external tools settings for Android

Warning: Unity does not officially support versions of the OpenJDK, SDK, or NDK other than the ones it supplies.

To change the OpenJDK, SDK Tools, or NDK that Unity uses to build Android apps:

  1. Open the Project.
  2. Open the Preferences window (Windows and Linux: Edit >Preferences; macOS: Unity >Preferences).
  3. In the left navigation column, select External Tools.

Change the OpenJDK path

  1. Uncheck JDK Installed with Unity (recommended).
  2. In the JDK field, enter the path to the JDK installation folder, or use the Browse button to locate it.

Change the Android SDK Tools path

  1. Uncheck Android SDK Tools Installed with Unity (recommended).
  2. In the SDK field, enter the path to the SDK installation folder, or use the Browse button to locate it.

Unity works with the most recent version of the Android SDK available at the time of the Unity version release.

Change the Android NDK path

  1. Uncheck Android NDK Installed with Unity (recommended).
  2. In the NDK field, enter the path to the NDK installation folder, or use the Browse button to locate it.

Each version of Unity requires a specific version of the Android NDK to be installed:

Unity version NDK version
2017.4 LTS r13d
2018.4 LTS r16b
2019.1 r16b
2019.2 r16b
2019.3 r19

See the System requirements page for a complete list of requirements.

Источник

Android environment setup

To build and run for Android, you must install the Unity Android Build Support platform module. You also need to install the Android Software Development Kit (SDK) and the Native Development Kit (NDK) to build and run any code on your Android device. By default, Unity installs a Java Development Kit based on OpenJDK.

Note: Unity supports Android 4.4 “KitKat” and above. See AndroidSdkVersions for details.

1. Install Android Build Support and the Android SDK & NDK tools

Use the Unity Hub to install Android Build Support and the required dependencies
See in Glossary : Android SDK & NDK tools, and OpenJDK.

Add Android modules

You can install Android Build Support, the Android SDK & NDK tools and OpenJDK when you install the Unity Editor, or add them at a later time.

For information on adding the Android modules:

If you are using a 2018 version of Unity, see the Unity 2018.4 documentation for information on manually installing these dependencies.

2. Enable USB debugging on your device

To enable USB debugging, you must enable Developer options on your device. To do this, find the build number in your device’s Settings menu. The location of the build number varies between devices; for stock Android, it’s usually Settings > About phone > Build number. For specific information on your device and Android version, refer to your hardware manufacturer.

After you navigate to the build number using the instructions above, tap on the build number seven times. A pop-up notification saying “You are now X steps away from being a developer” appears, with “X” being a number that counts down with every additional tap. On the seventh tap, Developer options are unlocked.

Note: On Android versions prior to 4.2 (Jelly Bean), the Developer options are enabled by default.

Go to Settings > Developer options (or, if this does not work, on some devices the path is Settings > System > Developer options), and check the USB debugging checkbox. Android now enters debug mode when it is connected to a computer via USB.

Connect your device to your computer using a USB cable. If you are developing on a Windows computer, you might need to install a device-specific USB driver. See the manufacturer website for your device for additional information.

The setup process differs for Windows and macOS and is explained in detail on the Android developer website. For more information on connecting your Android device to the SDK, refer to the Run Your App section of the Android Developer documentation.

Customizing the Android SDK & NDK Tools and OpenJDK installation

Unity recommends that you use the Unity Hub to install Android SDK & NDK tools, to ensure that you receive the correct versions and configuration. Unity installs Android SDK & NDK Tools and OpenJDK respectively in the SDK, NDK and OpenJDK folders under /Unity/Hub/Editor/[EditorVersion]/Editor/Data/PlaybackEngines/AndroidPlayer/.

If you have multiple versions of Unity with the same required dependencies (be sure to check System requirements for the latest) and you want to avoid duplicating the installation of Android SDK & NDK Tools and OpenJDK, you can specify a shared location in the Unity Preferences window. To do this, go to Preferences > External tools and enter the directory paths in the SDK and NDK fields:

Preferences window showing external tools settings for Android

Warning: Unity does not officially support versions of the OpenJDK, SDK, or NDK other than the ones it supplies.

To change the OpenJDK, SDK Tools, or NDK that Unity uses to build Android apps:

  1. Open the Project.
  2. Open the Preferences window (Windows and Linux: Edit >Preferences; macOS: Unity >Preferences).
  3. In the left navigation column, select External Tools.

Change the OpenJDK path

  1. Uncheck JDK Installed with Unity (recommended).
  2. In the JDK field, enter the path to the JDK installation folder, or use the Browse button to locate it.

Change the Android SDK Tools path

  1. Uncheck Android SDK Tools Installed with Unity (recommended).
  2. In the SDK field, enter the path to the SDK installation folder, or use the Browse button to locate it.

Unity works with the most recent version of the Android SDK available at the time of the Unity version release.

Change the Android NDK path

  1. Uncheck Android NDK Installed with Unity (recommended).
  2. In the NDK field, enter the path to the NDK installation folder, or use the Browse button to locate it.

Each version of Unity requires a specific version of the Android NDK to be installed:

Unity version NDK version
2017.4 LTS r13d
2018.4 LTS r16b
2019.1 r16b
2019.2 r16b
2019.3 r19

See the System requirements page for a complete list of requirements.

Источник

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *

Adblock
detector